12v Xplorer 30A Onboard DC/DC Charger with Solar MPPT, Bluetooth & LCD Display

Xplorer 30A DC-DC On-Board Solar Charge controller with Bluetooth

• This 30A DC/DC & Solar charge controller With a variety of charging modes, such as photovoltaic charging backup battery alone, generator charging backup battery alone, photovoltaic and generator’s charging backup battery at the same time, photovoltaic charging startup battery and soon.
• This 30A dc-dc controller are used in dual battery system, where the alternator and the start battery are combined with the service battery(of equal or different voltages)to charge it, also take PV power to charge the service battery and start battery.
• PowerCatcher MPPT technology is still available for tracking the maximum power point of solarcells in a complex environment; and compared with conventional MPPT technology, PowerCatcherhas faster response speed and higher tracking efficiency, which can reach 99.9%.
• MPPT Controller Support a wide variety of generators such as intelligent generator and conventional generator, and automatically identify generator types through ignition signals.
• Controller With the function of line loss compensation of backup battery charging voltage, which makes the battery charging voltage control more accurate.
• With backup battery temperature sampling function, lead-acid battery support temperaturecompensation and effectively prolonging battery life.
• With automatic derating function for high-temperature charging. TTL communication which can provide technical support of communication protocol to facilitate users’ secondary development and application.
• Parameters can be monitored and set through mobile APP (optional, Bluetooth module now included)and PC monitoring and setting software.
• High-quality aluminum radiator and high-temperature derating processing can ensure reliable and efficient operation in each work environment.
• Car Generator support: Conventional(13.2～16V/26.4~32V DC), Intelligent (Euro 6 Standard) Generator(12～16V/24~32V DC), Backup battery supports a wide variety of batteries such as gel, sealed, AGM, open-type, lithium battery and custom battery.

Very clear LCD display and indicator

• With Maximum Power Point Tracking (MPPT) System, which is an advanced charging technology which can output more energy by adjusting the work state of electrical module.
• Maximum Charging Conversion Efficiency: 98%
• Temperature compensation factor: -3mV/ ℃/2V
• Operating temperature: －35℃～65℃

High-quality aluminum radiator

• MPPT controller can make the most of the solar panel’s max. power and therefore provide larger charging current. Compared with conventional PWM controllers, MPPT controller can raise the energy utilization ratio by 15% to 20%
• Lead-acid battery charging: Bulk, EQUALIZE, BOOST, Floating Charge
• Lithium Battery Charging: two-stage charging, bulk+constant;

TTL communication/High-quality terminal block

• TTL Communication Interface
• Backup Battery Temperature Sampling Interface(includes)
• Ignition Signal Interface(includes)
• Remote Switch Interface
• Backup Battery Voltage Compensation Interface

Solar Charge Controller’s Parameter

Leisure Battery

1. Battery Voltage Range: 9~16V DC
2. Battery Type: Sealed Battery, Gel Battery, Vented Battery, Lithium Iron Phosphate Battery, User-defined Battery
3. Rated Charging Current: 30A

Solar PV

1. Maximum PV Input Voltage: 40V DC
2. Maximum PV Input Current: 45A
3. Max. power point voltage range: 17~36V

• We strongly recommend connecting fuses or circuit breakers at the photovoltaic array end, load end and battery end to prevent electric shock hazard in the process of wiring or misoperation, and ensure that the fuses or circuit breakers are disconnected before wiring.
• NEVER install the Controller and open the battery in the same closed space! Do not install it in a closed place where battery gas may accumulate.
• When installing the Controller, ensure enough air flowing through the heat sink of the Controller, and reserve at least 150mm space above and below the Controller for natural convection.
• Maximum input current of PV terminal: 45A, PV-terminal wire gauge: 9mm2/6AWG, PV Fuse Spec: 60~70A, Maximum input current(A) OF generator terminal:60A
• Engine Batteryterminal wire gauge: 12mm2, terminal fuse spec: 80-90A
• Leisure Battery terminal wire gauge:12mm2/6AWG min , Battery terminal fuse spec: 60-70A