XTRA SERIES 12V/24V 30A MPPT SOLAR CONTROLLER WITH LCD DISPLAY

New XTRA series has Lithium battery support (set via PC cable only)

​The XTRA tracer models have a current limiting function, you can connect twice the rated power to the controller ​so if your on a budget you can use a smaller controller with more panels so that you get more power in winter or low light but don’t risk overloading the controller in the summer.  The output will be limited to the max listed above.

XTRA series are advanced maximum power point tracking (MPPT) charge controllers, for off grid photovoltaic systems, with display unit.

In order to maximise the energy harvest from PV arrays and simultaneously minimise the power loss within a wide range of operating conditions, XTRA series apply an advanced smart algorithm which results in up to 30% higher efficient charging, compared to a conventional pulse width modulation (PWM) charge controller. Xtra series controller have limit protection function on charging current &charging power, as well as auto derating power operation at high temperature; the above protection ensure the stability of system even at exceeded rated PV power and over temperature conditions.

Protection class IP32 and isolated RS485 communication port further improve the controller’s reliability under different application requirements. XTRA series controllers incorporate a self-adaptive three-stage charging algorithm based on a digital control circuit, which eeffectively prolongs the lifespan of battery and significantly improve the system performance. It also has extensive electronic protection for overcharge, over discharge, PV&battery reverse polarity and etc. to ensure the sustainability and durability of the o-grid solar system.

Features:

• Advanced MPPT technology & ultra-fast tracking speed is up to 99.5% guaranteed
• Maximum DC/DC transfer efficiency is as high as 98%, full load transfer efficiency is up to 97.4%
• Wide MPP operating voltage range
• Low temperature protection and self activate function for lithium battery charging
• Limit charging power & current over rated range
• Real-time energy statistics function
• Multiple load work modes
• Comprehensive electronic protection
• Compatible with lead acid and lithium-ion¹ batteries
• Over temperature protection and power degrading in higher temperature
• Optional LCD display units (XDB1/XDS1/XDS2) and accessories
• High quality and low failure rate components of ST or IR to ensure service life
• Isolated RS485 communication port with 5V/200mA protected output, with standard Modbus protocol Monitor and set the parameters via APP or PC software
• Dustproof and waterproof design with IP32² protection class
• CE certification(LVD IEC62109,EMC EN3/1-6-61000)

¹ If using Lithium battery, customer should use “PCsoftware” to set the lithium battery parameters
² Ingress of solid objects:Protected against solid objects over 2.5mm
² Ingress of liquids: Protected against falling drops of water, if the case is disposed up to 15 from vertical

Electronic Protections：

• PV short circuit  protection
• PV overvoltage alarm protection
• PV current limiting protection
• PV reverse polarity protection
• Battery overcharge protection
• Battery over discharge protection
• Battery reverse polarity protection
• Load overload protection
• Load short circuit protection
• Overheating protection

Suitable for 12v up to 390W systems and 24V 780w Systems.

Bluetooth phone monitoring module with com cable available here 

Monitor and set the parameters via mobile phone APP or PC software Full-load operation without any drop in capacity within the range of working environment temperature Extensive electronic protection