The G7200 is a portable and automatic battery charger. It can be used for both 12V and 24V lead-acid,AGM, GEL and lithium-ion batteries. The G7200 is designed for charging cars, boats, RVs, SUVs, diesel trucks, motorcycles, ATVs, snowmobiles, personal watercraft, lawn mowers, and much more. It also can be used as a battery maintainer to keep both starter and deep-cycle batteries fully charged. It also monitors battery activity for safe and efficient charging without any overcharge. The G7200 is complete with a built-in battery desulfator in order to rejuvenate under-performing batteries.
- A 12V and 24V battery charger and maintainer.
- Charges lead-acid and lithium-ion batteries up to 230 amp-hours.
- Recovers deeply discharged batteries down to 2-volts.
- Spark-proof technology and reverse polarity protection.
- Built-in battery desulfator to recover worn-out batteries.
- Safely monitors battery actively with zero overcharge.
- Suitable for start-stop and CANbus vehicle systems.
- Advanced diagnostics indication for damaged batteries.
- Progressive repair mode for heavily sulfated 12V batteries.
- Constant power supply for changing a car battery or powering 12V devices
Eight battery chargers in one.
Other brands require a separate battery charger for 12V charging, 24V charging, AGM batteries, for cold conditions, lithium-ion batteries, and battery desulfation. Have peace-of-mind knowing that as your needs and vehicles change, your versatile multi-purpose charger can stay the same. With a simple push of a button, you'll have the power to switch between various charging modes within one complete battery charger. And it's equipped with a progressive repair method for recovering heavily sulfated and weak 12-volt batteries.
Safe to leave connected with zero overcharging.
Most manual, automatic or semi-automatic battery chargers continuously trickle charge batteries. Traditional chargers are susceptible to overcharge, thus limiting battery life. Our intelligent battery maintenance technology monitors battery activity, and only begins charging when needed. This system allows for continuous operation without user intervention, and zero risk of overcharging your battery.
Battery charging with intelligence.
Smart battery chargers can be frustrating. It won't simply begin charging if it detects a weak or damaged battery, or force charging if it detects an unsafe or abnormal charging condition. However, prevention is just one aspect. Understanding and finding a solution is just as critical. Welcome to Advanced Diagnostics, which analyzes battery feedback and display a particular error pattern if a problem is detected. Each flash pattern tells you what's wrong, and how to quickly fix it.
Single Flash: Battery will not hold a charge and should be checked by a professional.
Double Flash: Possible battery short, and should be verified by a professional.
Triple Flash: Battery voltage is too high for the selected charge mode. Double check the battery matches the charge mode.
Error LED Solid Red: Reverse polarity. Reverse the connections to the battery.
Standby LED Solid Orange: Battery voltage is too low for the battery charger to detect the battery
Charge batteries directly from the 12-volt port.
CANbus electrical systems found on BMW, Ducati, Triumph and Harley-Davidson motorcycles disable the 12-volt charging port when the ignition is off. Recharging requires the ignition to be on, or direct connection to the battery. With CANbus enabled technology our chargers send a unique voltage signal that automatically opens, and allows charging through the 12-volt accessory port.